BHSYM - DICOR ETCHING GEL
- MSDS: BHSYM
- Manufacturer: CAULK DENTSPLY
- Product Name: DICOR ETCHING GEL
- National Stock Number: 6520-00F010649
Product Identification
Product ID:DICOR ETCHING GEL
MSDS Date:12/01/1985
FSC:6520
NIIN:00F010649
MSDS Number: BHSYM
Responsible Party
MILFORD, DE 19963
Emergency Phone: (302) 422-4511
Info Phone: (302) 422-4511
Preparer: EARL C. FRANCIS
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
AMMONIUM BIFLUORIDE (SARA III)
CAS: 1341-49-7
RTECS: BQ9200000
Fraction By Weight: <11%
OSHA PEL 2.5 MG F/M3
ACGIH TLV: 2.5 MG F/M3; 9192
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: SALVIATION, COUGHING,
CHOKING, CHILLS, FEVER, ANGINA, PULMONARY EDEMA W/CYANOSIS, KIDNEY
& LIVER. SKIN: MAY IRRITATION, LACRIMATION, CORNEAL OPACITY &
BURNS. INGESTION: GASTROINTESTIONAL, NAUSEA, VOMITING, DIARRHEA,
MAY BE FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: WEIGHT LOSS/BRITTLE
BONES/ANEMIA/WEAKNESS/STIFFNESS OF JOINTS MOTTLED TEETH. SKIN:
REPEATED/PROLONGED CONTACT MAY CAUSE CONJUNCTIVITIS. INGESTION:
GASTROENTERITIS/HEMORRHAGIC/SEVERE SHOCK/ VASOMOTOR
DEPRESSION/CARDIAC DISTURBANCES. <0.8G TAKEN IN HUMAN BY MOUTH
CAUSE DANGEROUS POISONING DUE TO HYPOCALCEMIA.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE TO FRESH AIR. IF BREATHING
HAS STOPPED. GIVE ARTIFICIAL RESPIRATION, KEEP AFFECTED PERSON
WARM/REST. GET MED ATTN. EYES: WASH W/LARGE AMOUNTS OF WATER 15-20
MINS. GET MED ATTN. INGESTION: IF VICTIM IS CONSCIOUS, DON'T
INDUCE VOMITING. GIVE MILK OR SEVERAL OUNCES OF MAGNESIA. GET MED
ATTN.
Fire Fighting
Flash Point:NOT FLAMMABLE
Extinguishing Media:DRY CHEMICAL, CO2, WATER SPRAY OR FOAM
Fire Fighting Procedures:MOVE CONTAINERS FROM FIRE AREA IF POSSIBLE.
COOL CONTAINERS EXPOSED TO FLAMES.
Accidental Release
Spill Release Procedures:DON'T TOUCH SPILLED MATERIAL. FOR SMALL
SPILLS: WASH AWAY WITH COPIOUS QUANTITIES OF WATER. FOR LARGER
SPILLS: TAKE UP WITH SAND OR OTHER ABSORBENT MATERIAL. PLACE IN
CONTAINERS FOR DISPOSAL.
Handling
Handling and Storage Precautions:OBSERVE NORMAL WAREHOUSING PROCEDURES.
KEEP AWAY FROM FOODSTUFFS & BEVERAGES. AVOID BREATHING FUMES FROM
BURNING MATERIALS.
Exposure Controls
Respiratory Protection:FOR LOW LEVELS-CHEMICAL CARTRIDGE RESPIRATOR
WITH AN ACID GAS CARTRIDGE.
Ventilation:PROVIDE LOCAL EXHAUST SYSTEM TO MEET PERMISSIBLE
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES & FACESHIELD
Other Protective Equipment:EYEWASH FOUNTAIN
Work Hygienic Practices:AVOID BREATHING FUMES FROM BURNING MATERIALS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Melt/Freeze Pt:M.P/F.P Text:23F
Spec Gravity:1.0
Solubility in Water:SOLUBLE
Appearance and Odor:GREENISH GEL WITH ACRID ODOR.
Percent Volatiles by Volume:87%
Stability
Stability Indicator/Materials to Avoid:YES
POTASSIUM CHLORATE, SILICEOUS MATERIAL, MOST METALS, STRONG BASES
Stability Condition to Avoid:HEAT, FLAMES
Hazardous Decomposition Products:CORROSIVE AMMONIA, HYDROGEN FLUORIDE &
OXIDES OF NITROGEN.
Disposal
Waste Disposal Methods:CORROSIVE MATERIAL
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.